Permanent on concrete border

The Deflex traffic calming device is a versatile road delineator with many uses: mobile deployment, permanent installation, seasonal use, etc. On this page we provided information and visual assistance to help with the easy installation of the delineator and channelizer.

You’ll find illustrated and video explanation for each installation option. Below is a chart listing suggested spacing for each situation and use of the Deflex road delineator.


Screws and plates for permanent delineator installation

Concrete border kit

Permanent on concrete border
3/8-15 x 2,5'' zinc plated

1579$ per pack of 1

Shipping & applicable taxes not included.

Installation steps

  1. Set the Deflex delineator over the desired spot. Mark the position of the three holes at the base of the post.
  2. Using the drill and a 3/8’’ (10mm) bit, drill the three holes in the concrete border 2.5’’ deep.
  3. With a 9/16’’ (15mm) key, screw the Deflex delineator into the concrete border with the reinforcement plates.

Suggested tools:
Drill with 3/8’’ (10mm) bit, 9/16″ (15 mm) key


Suggested ZoneGuard corridor and critical zone