Seasonal or permanent on asphalt

The Deflex traffic calming device is a versatile road delineator with many uses: mobile deployment, permanent installation, seasonal use, etc. On this page we provided information and visual assistance to help with the easy installation of the delineator and channelizer.

You’ll find illustrated and video explanation for each installation option. Below is a chart listing suggested spacing for each situation and use of the Deflex road delineator.

Seasonal or permanent use on asphalt

Shield and bolts for asphalt delineator installation

Asphalt shield & bolts

Seasonal or permanent installation on asphalt

2249$ per pack of 1

Shipping & applicable taxes not included.

Installation steps

  1. Set the Deflex delineator over the desired spot. Mark the position of the three holes at the base of the post.
  2. Using the drill and a 5/8’’ (16mm) bit, drill the three holes in the asphalt 2.25’’ deep.
  3. With a manual blower remove all dust and crumbs from the holes.
  4. At the bottom of the hole place a few drops of epoxy, approximately 1/4 inch high.
  5. Put the insert in the hole and screw in with the hexagonal M8 key.
  6. With a 9/16’’ (15mm) key, screw the Deflex delineator into the adaptor.

Suggested tools:
Drill with 5/8’’ (16 mm) bit, Manual blower, Epoxy, M8 hexagonal key, 9/16’’ (15 mm) key


Suggested ZoneGuard corridor and critical zone